Read Current Data

READ CURRENT DATA
1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Transmission} and press the [YES] key.
3. Press the [YES] key after the {Center Differential Control} is displayed.
4. On the [[Transmission Diagnosis]] screen, select the {Current Data Display/Save}, and then press the [YES] key.
5. On the [[Data Display Menu]] screen, select the data display style and press the [YES] key.
6. Using a scroll key, move the display screen up or down until necessary data is shown.





^ A list of the support data is shown in the following table.

NOTE: For details concerning operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.