P2103
DTC P2103 THROTTLE ACTUATOR CONTROL MOTOR CIRCUIT HIGH1. OUTLINE OF DIAGNOSIS
Judge NG when the electronic throttle control power is not supplied even when ECM sets the electronic throttle control relay to OFF.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
- Ignition switch ON -> OFF
- Ignition switch OFF -> ON (After clear memory only)
5. DIAGNOSTIC METHOD
Judge OK and clear the NG when the malfunction criteria are completed.
6. DTC CLEAR CONDITION
- When the OK idling cycle was completed 40 times in a row
- When "Clear Memory" was performed (Only with engine stopped)
7. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle was completed 3 times in a row
- When "Clear Memory" was performed (Only with engine stopped)
8. FAIL SAFE
Stop the continuity to the electronic throttle control motor. (Fix the throttle opening angle to 6 degree.)
9. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)