Antitheft and Alarm Systems: Service and Repair

Immobilizer Antenna

REMOVAL
1. Disconnect the ground cable from battery.




2. Remove the screws, and detach the upper column cover and lower column cover.
3. Remove the instrument panel lower cover.
4. Disconnect the immobilizer antenna connector (A) and ignition switch lighting connector (B).




5. Loosen the screw and release the lock (D) at opposite side using flat-tip screwdriver (1), and then detach the immobilizer antenna (C).

CAUTION: Do not apply excessive force to remove the immobilizer antenna and lock. Otherwise they may be broken because those parts are the products made of a plastic.

INSTALLATION
Install in the reverse order of removal.