Radiator Sub Fan

COMPONENTS





RADIATOR AND RADIATOR FAN

REMOVAL
1. Set the vehicle on a lift.
2. Remove the collector cover.





3. Disconnect the ground cable from battery.





4. Remove the hood stay holder.
5. Remove the air intake duct.





6. Disconnect the connector from radiator fan control unit.





7. Remove the bolts which hold sub fan shroud to radiator.
8. Lift-up the vehicle.
9. Remove the under cover.
10. Remove the radiator sub fan shroud through the under side of vehicle.

INSTALLATION





Install in the reverse order of removal.

DISASSEMBLY





1. Remove the nut which holds fan itself onto fan motor and shroud assembly.





2. Remove the screws which hold the fan motor onto shroud.
3. Remove the bolts which hold the radiator fan control unit onto shroud.

ASSEMBLY








Assemble in the reverse order of disassembly.

INSPECTION





1. Disconnect the connector from radiator fan control unit.

NOTE: Do not remove the main fan motor harness connector.





2. Connect the battery to radiator fan control unit as shown in the figure.
3. Check the fan motor for operations. If it does not operate, replace the fan motor.