Shift Linkage: Service and Repair

AT Steering Shift Switch

REMOVAL
1. Disconnect the ground cable from battery.
2. Set the tire to the straight-ahead position.
3. Remove the airbag module.

WARNING: With the airbag module equipped, always refer to Airbag System when performing the airbag module repair service.

4. Remove the steering wheel.
5. Remove the cover from steering wheel.





6. Remove each one of AT steering shift switch mounting screw from the LH and RH side.

7. Remove the steering shift switch.

INSTALLATION
1. Clean all parts before installation.
2. Install in the reverse order of removal.
3. After completion of installation, set the select lever to SPORT shift side and confirm that manual mode 1 illuminates on the combination meter.
4. Operate the steering shift switch and confirm that the 2 illuminates on combination meter.





INSPECTION