Center Exhaust Pipe

COMPONENT

REMOVAL
1. After removing the center and front exhaust pipes as an assembly, separate them. Refer to "Front Exhaust Pipe" for removal procedure.
2. Remove the front oxygen (A/F) sensor and rear oxygen sensor.

INSTALLATION
1. Install the front oxygen (A/F) sensor and rear oxygen sensor.
2. Install the center exhaust pipe and front exhaust pipe as an assembly. Refer to "Front Exhaust Pipe" for installation procedure.

INSPECTION
1. Make sure there are no exhaust leaks from connections and welds.
2. Make sure there are no holes or rusting.