display screen, select the {Each System Check} and press the [YES] key.
5. On the display screen, select the [Cruise Control] and press the [YES] key.
6. Press the [YES] key after displayed the information of engine type.
7. On the <Cruise Control Diagnosis> display screen, select the [Current Data Display & Save] and press the [YES] key.
8. Make sure that normal indication is displayed when controls are operated as indicated below:
- Depress/release the brake pedal. (Stop light switch and brake switch turn ON.)
- Turn ON the "SET/COAST" switch.
- Turn ON the "RESUME/ACCEL" switch.
- Depress/release the clutch pedal. (MT)
- Set the selector lever to P or N. (AT)

NOTE
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
- For detailed concerning diagnostic trouble codes (DTCs), refer to the List of Diagnostic Trouble Code (DTC). Cruise Control - Diagnostics