Air Cleaner Housing: Service and Repair

Air Cleaner Case

REMOVAL




1. Disconnect the ground cable from battery.
2. Remove the air intake duct.




3. Disconnect the connector from mass air flow and intake air temperature sensor.
4. Loosen the clamp (A) which connects air cleaner case to intake duct.




5. Remove the clip (B) from the upper side of air cleaner case.




6. Remove the air cleaner case (rear) and air cleaner element.




7. Remove the bolt (A) and nut (B) which hold air cleaner case on the body.
8. Remove the air cleaner case (front).

INSTALLATION




Install in the reverse order of removal.






NOTE: Fasten with a clip after inserting the lower tab of the case.