Front Link

Front Link

REMOVAL
1. Lift-up the vehicle, and then remove the rear wheels.





2. Using a transmission jack, support the rear arm horizontally.





3. Remove the bolt which secures the front link to sub frame.





4. Remove the bolt which secures the front link to rear arm, and then remove the front link.

INSTALLATION
1. Using a transmission jack, support the rear arm horizontally.





2. Using new self-locking nuts, install the front link.





CAUTION: Install the front link with the protrusion side faced to the front side of vehicle.

NOTE: Inspect the wheel alignment and adjust it if necessary.

Tightening torque: 120 Nm (12.2 kgf-cm, 89 ft. lbs.)

INSPECTION
Visually check the front link for damage and deformation.