Without Scan Tool

CLEAR MEMORY MODE
1. On the [[Main Menu]] display screen, select the {2. Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Integ. Unit mode} and press the [YES] key.
3. Press the [YES] key after the information of body integrated unit type is displayed.




4. On the [[Integ. Unit mode failure diag]] display screen, select the {Clear Memory} and press the [YES] key.
5. When "Done" is shown on the display screen, turn the ignition switch to OFF.

NOTE: For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION".