Read Current Data
Read Current DataOPERATION
1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Integ. Unit mode} and press the [YES] key.
3. On the [[Integ. unit mode failure diag]] display screen, select the {Current Data Display & Save} and press the [YES] key.
4. On the [[Data Display Menu]] screen, select the {12 Data Display} and press the [YES] key.
5. Using the scroll key, scroll the display screen up or down until the desired data is shown.
A support list contains both of analog and digital data, and they are shown in the table.