Manufacturer's Scan Tool
CLEAR MEMORY1. On the �Main Menu�, select the {2. Each System Check} and press the [YES] key.
2. On the �System Selection Menu� display screen, select the {Tire Pressure Monitor} and press the [YES] key.
3. Press the [YES] key after the {Tire Pressure Monitor} is displayed.
4. On the �Tire Pressure Monitor Diagnosis� display screen, select the {Memory Clear} and press the [YES] key.
5. When �Done� and �Turn ignition switch OFF� are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION".