Display of Status Information

DISPLAY OF STATUS INFORMATION

Check the operating condition of each sensor in the event of malfunction in seat belt buckle switch and seat position sensor, or when the seat belt buckle switch and seat position sensor has been replaced.
1. On the <

> display screen, select the {Each System Check} and press the [YES] key.
2. On the <> display screen, select the {Airbag System} and press the [YES] key.
3. On the <> display screen, select the {Status Data} and press the [YES] key.

A list of the support data is shown in the table.

NOTE: For details concerning operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.