Brake Light Switch: Adjustments
Stop Light SwitchADJUSTMENT
Loosen the lock nut, and adjust the stop light switch position until the clearance between the threaded end of the stop light switch and stopper (A) becomes 0.8 mm (0.031 inch). Then, tighten the lock nut.
NOTE: Tighten lock nut B until the threaded end of switch contacts the stopper. Hold the switch so that it does not rotate, and loosen the lock nut B approximately 60°.
The clearance (A) will become 0.3 mm (0.012 inch).