Operation CHARM: Car repair manuals for everyone.

Torque Specification

Cylinder Head





All steps follow the numerical sequence shown in the image except for Step 3.

Step 1. All bolts 20 Nm (2.0 kgf-m, 14 ft. lbs.)
Step 2. All bolts 50 Nm (5.1 kgf-m, 37 ft. lbs.)
Step 3a. Back off all bolts by 180° in reverse order of installation
Step 3b. Back off all bolts by another 180° in reverse order of installation
Step 4. 20 Nm (2.0 kgf-m, 14 ft. lbs.)
Step 5. Only bolts 1 through 4 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)
Step 6. Only bolts 5 through 8 44 Nm (4.5 kgf-m, 33 ft. lbs.)
Step 7. Tighten all bolts by 90°
Step 8. Tighten only bolts 1 through 4 by 45°


Crankshaft Pulley 178 Nm (18.1 kgf-m, 131 ft. lbs.)


Oil Pump 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)





Tighten the bolts in the numerical order as shown in the figure.


Water Pump 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)