Clear Memory Mode

CLEAR MEMORY MODE

1. On the [[Main Menu]] display screen, select the {2. Each System Check}.
2. On the [[System Selection Menu]] display screen, select the {Transmission Control System}.
3. Select the {OK} after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the {Clear Memory}.
5. When the Done is shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE:
^ For detailed operation procedure, refer to the Subaru Select Monitor OPERATION MANUAL.
^ When {Clear Memory 2} is selected and executed, DTC and learned control memory is cleared. If Clear Memory 2 is performed, execute the learning control.