P1448
DTC P1448 - FUEL TANK SENSOR CONTROL VALVE RANGE/PERFORMANCE1. OUTLINE OF DIAGNOSIS
Detect the tank pressure switching solenoid function abnormality.
The tank pressure sensor is a relative pressure sensor, which normally compares the pressure with the atmospheric pressure. The tank pressure switching solenoid is a solenoid, which shifts the compare space from opening to closed during the EVAP diagnosis. Detect the malfunction that the compare space remains closed. (Not judge NG after enable condition completed but assume NG before enable condition completed.)
- Normality Judgment
Judge OK when the fuel tank pressure does not change (or changes by less than 0.67 kPa (5 mmHg, 0.2 in Hg)) at atmospheric pressure changing by 0.67 kPa (5 mmHg, 0.2 in Hg) or more per 80 seconds.
- Abnormality Judgment
Judge NG temporarily when the fuel tank pressure changes by 0.67 kPa (5 mmHg, 0.2 in Hg) or more at atmospheric pressure changing by 0.67 kPa (5 mmHg, 0.2 in Hg) or more per 80 seconds, and then judge NG when the previous condition is completed 5 times in a row.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously in 80 seconds after starting the engine. (Do not diagnose during evaporative emission control system diagnosis.)
5. DIAGNOSTIC METHOD
- Abnormality Judgment
Count the counter up when the malfunction criteria are completed by checking the change such tank pressure, atmospheric pressure and fuel level during every 80 seconds. Judge NG when the count comes to the specified number (3 times).
- Normality Judgment
Judge OK and clear the NG when all the malfunction criteria are completed.
6. DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" was performed
7. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle is completed 3 times in a row
- When "Clear Memory" was performed
8. FAIL SAFE
None
9. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)