Rear Sub Frame
Rear Sub FrameREMOVAL
1. Separate front exhaust pipe and rear exhaust pipe.
2. Remove rear exhaust pipe and muffler.
3. Remove rear differential.
4. Disconnect link front from sub frame.
5. Disconnect link. rear from sub frame.
6. Disconnect link upper from sub frame.
7. Place transmission jack under sub frame.
8. Remove support sub frame front.
9. After removing bolts, remove sub frame and support sub frame from vehicle body.
INSTALLATION
1. Installing reverse order of removal.
2. For installation and tightening torque of rear differential.
3. Using transmission Jack, support rear arm horizontally and tighten nuts and bolts securing rear arm, link front, link rear, link upper and shock absorber.
4. Install support subframe front.
NOTE: Check wheel alignment and adjust if necessary.
INSPECTION
Check removed parts for wear, damage and. cracks, and correct or replace if defective.