Preparation For Overhaul

Preparation for Overhaul

PROCEDURE





1. After removing the engine from the body, secure it in the ST shown below.
ST1 498457000 ENGINE STAND ADAPTER RH
ST2 498457100 ENGINE STAND ADAPTER LH
ST3 499817100 ENGINE STAND
2. In this the procedures described under each index are all connected and stated in order. It will be the complete procedure for overhauling of the engine itself when you go through all steps in the process. Therefore, to conduct the particular procedure within the flow of a section, you need to go back and conduct the procedure described previously in order to do that particular procedure.