Seat Belt System

Inspection Locations After a Collision

INSPECTION
Check for the following, and then replace with new parts if necessary.
- Center pillar lower garnish is discolored or cracked.
- Wire harness and connector are damaged.

1. FRONT OUTER BELT
Check for the following, and replace with new parts if necessary.
- Pretensioner is cracked or deformed.
- Seat belt is slackened, bent or frayed. Seat belt is abnormally wound or extended.

2. FRONT INNER BELT
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle is engaged improperly.

REAR BELTS

1. OUTER BELT RH AND LH
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or frayed. Seat belt is abnormally wound or extended.

2. OUTER BELT CENTER
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or frayed. Seat belt is abnormally wound or extended.

3. INNER BELT
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle is engaged improperly.