Luggage / Roof Rack: Service and Repair

ROOF RAIL

Roof Rail:

REMOVAL

1. Remove the roof trim.
2. Remove the five installing nuts.
3. Carefully remove the clip on the front end in the horizontal direction, then remove the roof rail in the upward direction.






NOTE: When removing the C clip, apply force to it in the horizontal direction and then remove in the upward direction while bending the a section side claw out of the way.

INSTALLATION

Install in the reverse order of removal.

CAUTION: When removing or installing the roof rail, be careful not to scratch the body panel with the stud bolt of roof rail.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.53 ft-lb)