Operation CHARM: Car repair manuals for everyone.

Clearing Trouble Codes

CLEAR MEMORY MODE

1. On the [[Main Menu]] display screen, select the (Each System Check) and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the (Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the (Clear Memory) and press the [YES] key.
5. When "Done" is shown on the display screen, turn the Subaru Select Monitor and ignition switch OFF.

NOTE:
^ If (Clear Memory 21 is selected and performed, DTC and learned control memory are cleared. If Clear Memory 2 is performed, execute the advance operation of learning control.
^ For details concerning the operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".