Without Scan Tool

CLEAR MEMORY MODE

Clear the DTC stored in the occupant detection system module after repairing occupant detection system.

NOTE: After the breakdown is recovered, the breakdown code for completed recoveries are read out when the next breakdown occurs if the memory clear work is not performed.

1. Select the {Occupant Detection System} on the main menu, and press the [YES] key.
2. On the [[Occupant Detection System]] display screen, select {Clear Memory} and press the [YES]key.
3. When the {Done} is shown on the display, DTCs will be cleared.

NOTE: When the {Cannot erase the DTC stored, perform the diagnosis according to trouble symptom} is shown, read the DTC and perform the diagnosis according to DTC.