Scan Tool Testing

SUBARU SELECT MONITOR

OPERATION

1. HOW TO USE SUBARU SELECT MONITOR




1. Prepare the Subaru Select Monitor kit.
2. Connect the diagnosis cable to Subaru Select Monitor.




3. Insert the cartridge to Subaru Select Monitor.
4. Connect the Subaru Select Monitor to data link connector.




1. Data link connector is located in the lower portion of the instrument panel (on the driver's side).
2. Connect the diagnosis cable to data link connector.

CAUTION: Do not connect the scan tools except for Subaru Select Monitor.




5. Turn the ignition switch to ON (engine OFF), and the Subaru Select Monitor power switch to ON.
6. Using the Subaru Select Monitor, call up DTCs and various data, then record them.