Disassembly and Assembly
REAR SEATDISASSEMBLY
1. WAGON MODEL
1. Remove the rear seat.
2. Remove the hog rings (A) behind of seat backrest.
3. Remove the hog rings (A) on front side of cushion pad, and remove the cover.
4. Remove the hog rings (A) behind of seat cushion.
5. Remove the hog rings (A), and then remove the seat cushion cover.
2. SEDAN MODEL
1. Remove the rear seat.
2. Remove two nuts, and then remove the armrest assembly.
3. Remove the hog rings (A) behind of seat backrest.
4. Remove the hog rings (A), and then remove the seat cover.
5. Remove the hog rings (A) behind of seat cushion.
6. Remove the hog rings (A), and then remove the seat cushion cover.
7. Remove the nuts and screws, and then disassemble the armrest assembly.
ASSEMBLY
1. WAGON MODEL
Assemble in the reverse order of disassembly.
NOTE:
- Do not contaminate or damage the cover.
- While installing the hog rings, prevent the seat from getting wrinkled.
2. SEDAN MODEL
Assemble in the reverse order of disassembly.
NOTE:
- Do not contaminate or damage the cover.
- While installing the hog rings, prevent the seat from getting wrinkled.