Removal and Installation
REAR SEATREMOVAL
1. WAGON MODEL
1. Remove the bolts, and then detach the rear seat cushion.
2. Remove the headrest.
3. Remove the luggage floor mat.
4. Turn over the mat to remove the bolts.
5. Remove the rear seat backrest.
2. SEDAN MODEL
1. Remove the bolts, and then detach the rear seat cushion.
2. Remove the bolts securing lower portion of backrest and then open the center trunk through lid.
3. Lift the rear seat backrest and then remove it.
INSTALLATION
1. WAGON MODEL
Install in the reverse order of removal.
Tightening torque: Nm (kgf-m, ft-lb)
T1: 17.7 (1.81, 13.1)
T2: 24.5 (2.5, 18.1)
T3: 33 (3.3, 24.6)
2. SEDAN MODEL
1. Hook and fasten the upper-back side of the rear seat backrest to the body hook.
2. Tighten the bolts.
3. Hook and fasten the seat cushion to the hook on the lower part of the rear seat backrest.
Rear Seat (Sedan Model):
Rear Seat (Wagon Model):
Tightening torque: Nm (kgf-m, ft-lb)
T1: 17.7 (1.81, 13.1)
T2: 24.5 (2.5, 18.1)
T3: 33 (3.3, 24.6)