Fuel Sub Level Sensor

Fuel Sub Level Sensor

REMOVAL

WARNING:
- Place "NO FIRE" signs near the working area.
- Be careful not to spill fuel on the floor.
- Reduce the fuel on the fuel tank to less than 3/4 beforehand. Be careful that fuel may spill when the fuel is more than 3/4.

1. Disconnect the ground cable from battery.
2. Lift-up the vehicle.




3. Set a container under the vehicle and remove the drain plug from fuel tank to drain fuel.




4. Tighten the fuel drain plug.

NOTE: Use a new gasket.

5. Remove the luggage floor mat.




6. Remove the service hole cover.
7. Disconnect the connector from the fuel sub level ensor.




8. Disconnect the fuel jet pump hose.




9. Remove the bolts which install the fuel sub level ensor on fuel tank.




10. Remove the fuel sub level sensor.




INSTALLATION
Install in the reverse order of removal.

NOTE:
- Use a new gasket.
- Ensure the sealing portion is free from fuel or foreign articles before installation.