Drivers Air Bag

DRIVER'S AIRBAG MODULE

REMOVAL

CAUTION: Refer to "CAUTION" in General Description before handing the airbag module. Service Precautions

1. Position the front wheels straight ahead. (After moving the vehicle more than 5 m (16 ft) with front wheels positioned straight ahead, make sure that the vehicle moves straight ahead).
2. Turn the ignition switch to OFF.
3. Disconnect the ground cable from battery, and wait for at least 20 seconds before starting work.




4. Using the TORX BIT T30, remove the two TORX bolts on side of steering wheel.
5. Disconnect the horn harness.




6. Disconnect the airbag connector on the back of airbag module, and then remove the airbag module.
7. Refer to "CAUTION" for handling of a removed airbag module. Service Precautions

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Refer to "CAUTION" in General Description before handing the airbag module. Service Precautions
- Do not allow harness and connectors to interfere or get tangled up with other parts.

Tightening torque: Refer to "COMPONENT" in General Description. Locations