Yaw Rate and Lateral G Sensor
Yaw Rate and Lateral G SensorREMOVAL
1) Disconnect the ground cable from battery.
2) Remove the console cover.
3) Disconnect the connector from yaw rate lateral G sensor.
4) Remove the yaw rate lateral G sensor from body.
CAUTION:
Do not drop or bump the yaw rate lateral G sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Do not drop or bump the yaw rate lateral G sensor.
Tightening torque:
18 Nm (1.8 kgf-m, 13 ft. lbs.)