Clear Memory Mode
CLEAR MEMORY MODE1) On the "Main Menu" display screen, select the (2. Each System Check) and press the [YES] key.
2) On the "System Selection Menu" display screen, select the (Transmission) and press the [YES] key.
3) Press the [YES] key after the (Center Differential Control) is displayed.
4) On the "Transmission Diagnosis" display screen, select the (Clear Memory) and press the [YES] key.
5) When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE:
For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION".