Read Current Data

READ CURRENT DATA
1) On the "Main Menu" display screen, select the (Each System Check) and press the [YES] key.
2) On the "System Selection Menu" display screen, select the (Transmission) and press the [YES] key.
3) Press the [YES] key after the (Center Differential Control) is displayed.
4) On the "Transmission Diagnosis" screen, select the (Current Data Display/Save), and then press the [YES] key.
5) On the "Data Display Menu" screen, select the data display style and press the [YES] key.
6) Using a scroll key, move the display screen up or down until necessary data is shown.
^ A list of the support data is shown in the following table.

READ CURRENT DATA:

NOTE:
For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION".