With Manufacturer's Scan Tool

READ DIAGNOSTIC TROUBLE CODE (DTC)

OPERATION

1. ECM

1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Engine} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On the [[Engine Diagnosis]] screen, select the {DTC Display}, and then press the [YES] key.
5. On the [[Diagnostic Code(s) Display]] screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.

NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.
- For detailed concerning DTC, refer to the List of DTC.

2. BODY INTEGRATED UNIT

1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Integ. unit mode} and press the [YES] key.
3. Press the [YES] key after the {Integ. unit mode} is displayed.
4. On the [[Integ. unit failure diag]] display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.

NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.
- For detailed concerning DTC, refer to the List of DTC.