Basic Diagnostic Procedure

1. BASIC DIAGNOSTIC PROCEDURE

Step 1-6:

Step 7-11:

CAUTION:
- Security alarm ON/OFF setting
At the time of shipment from the factory, the security alarm is set to ON . However, when {Security setting initialization} is performed with the Subaru Select Monitor, the security alarm automatically is set to "OFF". When security initialization has been performed, always return the ON/OFF setting for the security alarm to "ON".
- Siren YES/NO setting
The {Siren YES/NO} setting of the item {Unit customization} of the Subaru Select Monitor always shall be set to "NO". If it is set to "YES", the horn of the security alarm will not sound.

NOTE: Check the function setting of body integrated unit if any of the following symptoms appear.
- The horn does not sound even when the security system operates.
- The horn sounds when setting the security to ON using the keyless transmitter.