With Manufacturer's Scan Tool

READ CURRENT DATA

OPERATION
1. On the "Main Menu" display screen, select the {Each System Check}.
2. On the "System Selection Menu" display screen, select the {Integ. unit mode}.
3. On the "Integ. unit mode failure diag" display screen, select the {Current Data Display & Save}.
4. On the "Data Display Menu" screen, select the {12 Data Display}.
5. Using the scroll key, scroll the display screen up or down until the desired data is shown.DISPLAY OF ANALOG DATA, OPERATION,DISPLAY OF ON/OFF DATA, OPERATION, CONFIRMATION OF CURRENT SETTING, OPERATION, Subaru Select Monitor. Subaru Select Monitor