Second-Row Seats
SECOND-ROW SEATSREMOVAL
1. LH & CTR SEAT
1. Tilt the backrest forward, and move the seat forward.
2. Remove the slide rail cover at the seat rear side, and remove the two bolts.
3. Move the seat to the rear end.
4. Remove the slide rail cover at the seat front side, and remove the two bolts.
5. Remove the seat from vehicle.
2. RH SEAT
1. Tilt the backrest forward, and move the seat forward.
2. Remove the slide rail cover at the seat rear side, and remove the two bolts.
3. Move the seat to the rear end.
4. Remove the slide rail cover at the seat front side, and remove the two bolts.
5. Remove the seat from vehicle.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: Refer to "COMPONENT" of "General Description".
NOTE: Tighten the slide rail bolts diagonally in two or three steps by gradually increasing the torque, until they reach the specified torque.