With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION

1. SUBARU SELECT MONITOR (NORMAL ODE)
1. On the "Main Menu" display screen, select the Each System Check} and press the [YES] key.
2. On the "System Selection Menu" display screen, select the {Engine} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the "Engine Diagnosis" screen, select the DTC Display}, and then press the [YES] key.
5. On the "Diagnostic Code(s) Display" screen, elect the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.

NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)

2. SUBARU SELECT MONITOR (OBD MODE)
1. On the "Main Menu" display screen, select the {Each System Check} and press the [YES] key.
2. On the "System Selection Menu" display screen, select the {Engine} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the "Engine Diagnosis" display screen, select the {OBD System} and press the [YES] key.
5. On the "OBD Menu" display screen, select the Diagnostic Code(s) Display and press the [YES] key.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)