Fuel Injector: Service and Repair

Intake Manifold (Part 1):

Intake Manifold (Part 2):

Fuel Injector:

Fuel Injector

REMOVAL

RH SIDE
1. Remove the collector cover.
2. Release the fuel pressure.
3. Disconnect the ground cable from battery.
4. Open the fuel filler flap lid, and remove the fuel filler cap.
5. Remove the air cleaner case.




6. Remove the fuel pipe protector RH.




7. Disconnect the connector from fuel injector.
8. Remove the engine harness from fuel injector pipe RH.




9. Remove the bolt which holds fuel injector pipe onto intake manifold.
10. Remove the fuel injector while lifting up the fuel injector pipe.

LH SIDE
1. Remove the collector cover.
2. Release the fuel pressure.
3. Remove the battery.
4. Open the fuel filler flap lid, and remove the fuel filler cap.
5. Remove the generator harness from fuel pipe protector LH.




6. Remove the fuel pipe protector LH.




7. Disconnect the connector from fuel injector.
8. Remove the engine harness from fuel injector pipe LH.




9. Remove the bolt which holds fuel injector pipe onto intake manifold.
10. Remove the fuel injector while lifting up the fuel injector pipe.

INSTALLATION

RH SIDE







Install in the reverse order of removal.

NOTE: Use new O-rings.

LH SIDE







Install in the reverse order of removal.

NOTE: Use new O-rings.