Display of Status Information

DISPLAY OF STATUS INFORMATION




Check the operating condition of each sensor in the event of malfunction in seat belt buckle switch and seat position sensor, or when the seat belt buckle switch and seat position sensor has been replaced.

1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Airbag System} and press the [YES] key.
3. On the [[Airbag System]] display screen, select the {Status Data} and press the [YES] key. The following table is for support data.

NOTE: For details concerning operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.