Power Window Switch: Service and Repair

Power Window Control Switch

REMOVAL

1. MAIN SWITCH
1. Disconnect the ground cable from battery.
2. Peel the cover inside the hand grip, and remove the screw.




3. Remove the power window switch cover assembly.
4. Disconnect the harness connector.
5. Remove the clip, and remove the power window main switch assembly.

2. SUB SWITCH
1. Disconnect the ground cable from battery.
2. Peel the cover inside the hand grip, and remove the screw.




3. Remove the power window switch cover assembly.
4. Disconnect the connector.
5. Detach the claw and remove the power window sub switch.

INSTALLATION
Install in the reverse order of removal.