Variable Induction Control Actuator: Service and Repair
Tumble Generator Valve ActuatorREMOVAL
1. RH SIDE
1. Release the fuel pressure.
2. Open the fuel filler flap lid and remove the fuel filler cap.
3. Disconnect the ground cable from battery.
4. Remove the intake manifold.
5. Disconnect the connector from tumble generator valve actuator RH.
6. Remove the tumble generator valve actuator RH.
2. LH SIDE
1. Release the fuel pressure.
2. Open the fuel filler flap lid and remove the fuel filler cap.
3. Disconnect the ground cable from battery.
4. Disconnect the connector from tumble generator valve actuator LH.
5. Remove the tumble generator valve actuator LH.
INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
2. LH SIDE
Install in the reverse order of removal.