Center Differential

Center Differential

REMOVAL
1) Remove the manual transmission case assembly from vehicle.
2) Prepare the transmission for overhaul.
3) Remove the extension case.
4) Remove the transfer driven gear.
5) Disconnect the center differential connector.
6) Remove the thrust washer and center differential.





7) Remove the needle bearing.





INSTALLATION
1) Install the needle bearing.





2) Install the thrust washer and center differential.





3) If replacing the center differential, select the transfer drive gear and thrust washer and install.
4) Connect the center differential connector, and secure it to oil guide.
5) Install the transfer driven gear.
6) Install the extension case.
7) Install the manual transmission case assembly to vehicle.

INSPECTION
Make sure there is no damage on the center differential, ball bearing and oil pump drive gear. Replace the center differential assembly if damaged.