Basic Diagnostic Procedure - With VDC

PROCEDURE








CAUTION: When the Subaru Select Monitor is communicating (except when displaying the data), the ABS warning light flashes and VDC warning light illuminates in the combination meter. Do not communicate with the Subaru Select Monitor while driving, because the ABS and VDC functions are disabled. Carefully drive the vehicle, when you have to communicate with the Subaru Select Monitor. When the data is displayed by the {Current Data Display & Save} menu, both the ABS and VDC warning lights are turned off and ABS and VDC functions are enabled.

NOTE:
^ To check the harness for broken wires or short circuits, shake problem spot or connector.
^ Refer to "Check List for Interview".