Engine Lubrication: Service and Repair

Oil Flow Control Solenoid Valve

REMOVAL
Oil flow control solenoid valve is a unit with camshaft cap.
Refer to Camshaft for removal procedure.

INSTALLATION

Refer to Camshaft for installation procedure.

DISASSEMBLY
1. Remove the 2 mounting bolts and remove the oil return cover and gasket.




2. Remove the mounting bolt and remove the oil flow control solenoid valve.

ASSEMBLY
1. Install the oil flow control solenoid valve.

Tightening torque:
8 N.m (0.8 kgf-m, 5.9 ft-lb)

2. Apply liquid gasket to the two bolts which secure the oil return cover.

Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or equivalent

3. Attach the oil return cover and gasket.

Tightening torque:
8 N.m (0.8 kgf-m, 5.9 ft-lb)






NOTE: Use a new gasket.