Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure SensorREMOVAL
1. Set the vehicle on a lift.
2. Disconnect the ground cable from the battery.
3. Open the fuel flap lid, and remove the fuel filler cap.
4. Lift up the vehicle.
5. Disconnect the connector from the fuel tank pressure sensor.
6. Disconnect the pressure hose from the fuel tank pressure sensor.
7. Remove the fuel tank pressure sensor along with the bracket
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)