Complete Unit

Sunroof Assembly

REMOVAL

1. SEDAN MODEL
1. Disconnect the ground cable from battery.
2. Remove the roof trim.
3. Disconnect the harness connector of sunroof motor.
4. Remove the glass lid.
5. Remove the drain tube from frame assembly.




6. Remove the assist rail bracket (front) (A) and sunroof bracket (rear) (B).




7. Remove the nuts, and then remove the frame assembly.

2. WAGON MODEL
1. Disconnect the ground cable from battery.
2. Remove the roof trim.




3. Disconnect the harness connector of motor assembly.
4. Remove the front and rear glass lid.




5. Remove the installation bolts (A) on rear side frame bracket of frame assembly.
6. Remove the drain tube from frame assembly.
7. Remove the frame bracket (A).




8. Remove the bolts (B) and nuts (C), and then remove the frame assembly.

INSTALLATION




Install in the reverse order of removal.

CAUTION: Be careful not to snag the harness.

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.