Center Exhaust Pipe

Center Exhaust Pipe

COMPONENT (part 1):

COMPONENT (part 2):

REMOVAL
1. After removing the center and front exhaust pipes as one unit, separate them. Refer to "Front Exhaust Pipe" for the removal procedure.
2. Remove the front oxygen (A/F) sensor and rear oxygen sensor.

INSTALLATION
1. Install the front oxygen (A/F) sensor and rear oxygen sensor.
2. Install the center exhaust pipe and front exhaust pipe as one unit.

INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Make sure there are no holes or rusting.