Read Current Data

READ CURRENT DATA
1) On the �Main Menu� display screen, select the {Each System Check}.
2) On the �System Selection Menu� display screen, select the {Transmission}.
3) Select the [OK] after the information of transmission type is displayed.
4) On the �Transmission Diagnosis� display screen, select the {Current Data Display & Save}.
5) On the �Transmission Diagnosis� display screen, select the {Data Display}.
6) Using the scroll key, scroll the display screen up or down until the desired data is shown.
A list of the support data is shown in the following table.





NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".