Removal and Replacement

FRONT BUMPER

Front Bumper:

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the front grille RH and front grille LH.
3. Remove the clips inside the mounting portion of front grille RH and front grille LH.






4. Remove the six clips on the upper part of bumper.






5. Remove the clips, which secure the front bumper to fender.






6. Remove the clips, and turn over the mud guard LH and RH.






7. Remove the three clips in the center, right and left part of bumper.






8. Remove the fog light.
9. Remove the bumper from body.
10. Remove the energy absorber foam from front bumper beam.






11. Loosen the bolt and nut, and then remove the bumper beam from body.






INSTALLATION

1. Install in the reverse order of removal.
2. Align the front bumper mounting hole with the pawl of slider (A) to install.






Tightening torque:
Refer to COMPONENT in General Description.
BUMPER, COMPONENT, General Description.>