Trunk Lid
TRUNK LIDREMOVAL
1. TRUNK LID
1. Open the trunk lid.
2. Disconnect the trunk lid connector.
3. Loosen the trunk lid mounting bolts to remove the trunk lid from hinges.
2. TORSION BAR
1. Open the trunk lid.
2. Using the ST, remove the torsion bar from hinge link.
ST 927780000 REMOVER
CAUTION: During removal and installation, carefully handle the torsion bar, because it will generate reactive force.
3. Remove the right/left torsion bars.
CAUTION: Be careful not to get hit by the trunk lid, because the trunk lid will slam shut after the torsion bar is removed.
B: INSTALLATION
1. TRUNK LID
1. Install in the reverse order of removal.
2. Install the trunk lid with uniform clearance.
Tightening torque: 14 N.m (1.43 kgf-m, 10.3 ft-lb)
2. TORSION BAR
1. Install in the reverse order of removal.
2. Apply grease to the rotating area of hinges and mating surface of torsion bar.