Seats: Service Precautions

CAUTION
- If the seat cushion cover has been removed or replaced, be sure to perform the system calibration for occupant detection system after installing seat to the vehicle.
Failure to do so may cause improper operation of occupant detection system.
- Never remove the occupant detection control module of occupant detection system (passenger s side only) or pressure sensor from seat cushion frame since the control module and occupant detection sensor are fixed to the seat cushion frame.
- Do not replace the seat cushion pad as a single unit. Be sure to replace the seat cushion pad and frame assembly together. Since the seat cushion pad and cushion frame have been adjusted at factory, installing them together with parts for other vehicle or ones of other set may cause improper operation of occupant detection system.
- If the seat cushion cover has been removed, be sure to replace wire on the seat cushion cover side with a new one. (Passenger's seat)
- Do not remove the seat position sensor from seat rail. (Driver's seat)
- When removing the front seat, follow cautions given in the airbag section.